I know no one is asking this question, but I’d like to clarify that all these office desk photos are taken on my mobile phone. Not the worst, but definitely not of the same quality as my CATA…
Mar 16, 2023 • Subscribe
More like this
Let’s Say Go! HasLab “Transformers: Victory” Victory Saber
Yes, you read that right. It’s not just Star Saber, nor just Victory Leo, it’s Victory Saber! Prior to the Hasbro Pulse Fan First Friday last week, they…
Fully Funded and Unlocked: HasLab “Transformers: Victory” Victory Saber
This is how I want my photos of this set would look once I have them as CATALOGUE Entries. Earlier this week, the HasLab Transformers: Victory Victory Saber…
Let’s Say Go… on the Desk! Transformers Generations – Legacy VICTORY SABER
Here’s a quick one. I’ve had the HasLab Victory Saber set for a couple or so months, but this is the first time I’ve actually made the entire…
Let’s Say Go… in Color! HasLab “Transformers: Victory” Victory Saber Colored Renders
Earlier today, Hasbro held a livestream with the awesome voice actor Chris Sabat (Vegeta in Dragonball Z / Super) to go through the currently-running Victory Saber crowdfunding project…
Glad I Backed It Up! HasLab “Transformers: Victory” Victory Saber First Look
HasLab’s Transformers: Victory Victory Saber is probably one of the most anticipated Transformers figures by collectors in 2022. And while I’ve forgotten when it’s supposed to be …
Stuff on the Office Desk: Collaboration Primes
I was initially aiming at finally bringing some Gunpla to the office desk, especially following my two viewings of Mobile Suit Gundam SEED FREEDOM. But with Lunar Cruiser…
Stuff on the Office Desk: Reformatted Prominons
I was supposed to post this late last week, but I totally forgot so here it is, with an addition. I got Mastermind Creations’ Reformatted Salvia Prominon, which…
Stuff on the Office Desk: “Beast Machines: Transformers” Blast Punch Optimus Primal
Besides catching up on Optimus Prime figures (licensed or unlicensed), I’m also sort of catching up on derivative characters based on him — one of which is Optimus…
Stuff on the Office Desk: October Optimus Primes
I realized this recently, but I’ve apparently been catching up and purchasing a lot more Optimus Primes figures than usual, both on the first- and third-party fronts. It’s…
Stuff on the Office Desk: An Actual Gundam
I’ve been placing collectibles on my office desk since 2022 and if you’ve been tracking these “Stuff on the Office Desk” posts, then you will notice one thing.…
Stuff on the Office Desk: Primal and Primes
I don’t know if this is just me being subconsciously excited for Transformers: Rise of the Beasts, which is just a couple of months or so away, but…
Stuff on Another Office Desk: United Colors of Commanders
I’m still sitting at the same office desk as usual, but I decided to hijack one of the managers rooms here for a better background, and because the…
Stuff on the Office Desk: Here Comes the Armada
Coming from my office desk post last week, I got my copy of Legacy: Evolution Armada Universe Optimus Prime last week and it is a really amazing Transformers…
Stuff on the Office Desk: More Silver Robot Kaijus
One of the primary reasons I’ve been putting some of my collection on the office desk is because I really don’t have enough space to display everything at…
Stuff on the Office Desk: THat’s one Heavy Prime
When I started collecting Optimus Prime figures oh so many years ago, I restricted myself to the Deluxe class size/price point. This limits the figures I can buy,…
Stuff on the Office Desk: G1 Prime Appreciation Time!
Last year’s announcement of Transformers Missing Link Optimus Prime created massive hype leading up to its release. And upon its release, all the hype paid off with such…
Stuff on the Office Desk: Transformers Legacy “A Hero is Born” Alpha Trion & Orion Pax
With the buzz surrounding the recently released Transformers: Rise of the Beasts trailer, I decided to take home Blast Punch Optimus Primal for a possible photo shoot (weird…
Stuff on the Office Desk: Completing the ‘Bay-verse’ Primes
As part of the whole reboot/soft reboot/what-have-you of the Transformers live action films, I decided to get copies of the Voyager Class Optimus Prime figures from the mainlines…
Stuff on the Office Desk: Still a Pain to Transform
A couple of weeks ago, I was finally able to get rubber tires for my SND-08 The One figure from, well, SND. To those unfamiliar, this is their…
Stuff on the Office Desk: More G1 Prime Appreciation Time!
When Takara Tomy announced Transformers Missing Link Optimus Prime/Convoy, I also somewhat started hunting for a proper G1 Optimus Prime figure. I know there it already has countless…
Stuff on the Office Desk: Overcompensation, and one is Valid
I’m still playing catch up on several Transformers figures, while getting the new ones at the same time. And for this round, we have a couple of figures…
Stuff on the Office Desk: Prime Primes, and Then Some
I’ve still yet to receive my Transformers: Rise of the Beasts figures in the next couple of weeks. So, in the meantime, here are the Primes on the…
Stuff on the Office Desk, Now with the Need for ‘SEED’
I recently mentioned in the last work in progress post that my energy for building SEED kits is currently drained, hence going back to UC kits. But that…
Jet Saber
Robot mode Vehicle mode Robot mode Vehicle mode General Information Unit type: robotHeight: 10.2 meters (Robot mode)Length: 18.6 meters (Vehicle mode)Weight: 18.5 metric tonsMaximum running speed: 180.6 km/hMaximum…
It’s Large! Next Transformers HasLab Project: Omega Prime (Transformers: Robots in Disguise, 2001)
The Transformers team over at Hasbro had their first Fanstream event on the 30th with the intention of revealing the brand’s next HasLab project. And as a way…
Stuff on the Office Desk: More Primes and a Possible Change?
If you’re a Transformers collector, then you should know that we have quite a number of Optimus Prime releases in 2023. From Legacy: Evolution, to Studio Series, and…
Stuff on the Office Desk: Both are Lions, One Looks Less
Over the past weekend, I finally got two of my more anticipated Transformers purchases which were made available at the last part 2022. First is the HasLab-excluive Victory…
Stuff on the Office Desk: Data Clerks with Blasters and Axes?
I recently got the Transformers Legacy: Evolution Amazon-exclusive “Humble Origins” two-pack of Senator Shockwave and Data Clerk Orion Pax. And I immediately sold off Senator Shockwave …
Stuff on the Office Desk: I Don’t Know How to Pose Dinosaurs
With only around a month before the greatest, dumbest, and probably most amusing movie of 2024, Godzilla ✕ Kong: The New Empire, is released in theaters, I decided…
Stuff on the Office Desk: Sen-Ti-Nel’s SV-Action SP//dr
While hybrid workplaces and setups continue to evolve, I still opted to work in the office. So, I still have a dedicated workstation that I can put stuff…
Stuff on the Office Desk: Amazing Yamaguchi Iron Man “Bleeding Edge” Armor
Did I just forget how to handle Revoltech figures and their weird joint cuts and what not? Get your Amazing Yamaguchi Iron Man “Bleeding Edge” armor from HobbyLink…
Stuff on the Office Desk: MakeToys’ Cross Dimension Thunder Manus (Powermaster Optimus Prime)
As post-pandemic workplaces continue to evolve, I still opted to work in the office. So, I still have a dedicated workstation that I can put stuff on. Including…
Stuff on the Office Desk: Xin Li Xing Oversized IDW Optimus Prime (tHRILLING 30, Legends Class)
We are now several days into 2023 which means the holidays are over and we’re, unfortunately, back to the daily grind of work. For me, this means going…
Stuff on the New Hobby Storage Room Desk, and Some Updates
If you’ve been following this blog for a good while, then might’ve noticed that beginning in late 2022, I’ve been doing a series of “Stuff on the–” posts.…
Metal Armor Dragonar Episode 48: Victory Hymn of Space
Well guys, it’s finally here. Metal Armor Dragonar episode 48 is done, and that’s the last episode of the entire series down. In other words, after so long–just…
Stuff From the Office Window Side: Figma Samus Aran (Metroid Dread)
The next couple of posts will be some sort of Metroid-slash-Samus Aran double combo, starting with this one. As I mentioned previously, I will be going on a…
The Anime That Didn’t Make Us #24 – God Mazinger, Transformers Victory, Maico 2010
We're back with guest Vinnie from All Geeks Considered to talk God Mazinger, Transformers Victory and Maico 2010
The Little Guys Who Live on My Desk
12 Days of Aniblogging 2023, Day 11 Normally I take the 24th off, but I had a nice low-effort idea this year. Now that you’re trapped inside my post,…
Large Shuttle
General Information Unit type: shuttleOriginal mechanical designer: Kunio Okawara Lineart Rear view
Pick of the Week: Sifting Through Large Piles
SEAN: There's a pile of stuff, but not too many titles that really leap out and grab me (aside from Medalist, of course). I've heard good buzz about…
12 Days of Stuff #3: On the labels we call ourselves
This year I read an essay that advised to keep your identity small, because the labels that we attach ourselves to can keep us from thinking objectively about…
Pegasus Saber
General Information Unit type: robotHeight: 25.5 metersWeight: 122.4 metric tonsMaximum running speed: 650.0 km/hMaximum speed: Mach 23.5Jumping power: 1,200.0 metersMaximum output: 580,000 horsepowerSpecial attack(s): Saber Arrow, Jumbo Tornado,…
Jet Granbird
Normal mode Gran Rocketer deployed Normal mode Gran Rocketer deployed General Information Unit type: robotHeight: 21.2 metersWeight: 85.6 metric tonsMaximum running speed: 166.0 km/hJumping power: 280.8 metersArmament: Gran…
Breaster Jet
General Information Unit type: support vehicleArmament: 6-tube missile pod x 2Original mechanical designer: Kunio Okawara Lineart Rear view
Jumbo Saber
Robot mode Vehicle mode Robot mode Vehicle mode General Information Unit type: robotHeight: 12.5 meters (Robot mode)Length: 58.6 meters (Vehicle mode)Weight: 42.0 metric tonsMaximum running speed: 160.0 km/hMaximum…
Jet Helicopter
General Information Unit type: helicopterArmament: cannon x 2Original mechanical designer: Kunio Okawara Lineart Cockpit Rear view
Shuttle Saber
Robot mode Vehicle mode Robot mode Vehicle mode General Information Unit type: robotHeight: 10.3 meters (Robot mode)Length: 36.2 meters (Vehicle mode)Weight: 32.9 metric tonsMaximum running speed: 180.0 km/hMaximum…
Hawk Saber
Robot mode Hawk mode Robot mode Hawk mode General Information Unit type: robotHeight: 12.5 meters (Robot mode)Length: 8.0 meters (Vehicle mode)Weight: 29.0 metric tonsMaximum running speed: 290.3 km/hMaximum…
Why Saber?
One of the things that has confounded me for years now, ever since I first watched Fate/Stay Night and now revived during Fate/Zero, was why there’s so much…
Sky Saber
General Information Unit type: robotHeight: 23.2 metersWeight: 93.4 metric tonsMaximum running speed: 280.5 km/hMaximum speed: Mach 15Jumping power: 1,030.0 metersMaximum output: 385,000 horsepowerSpecial attack(s): Saber Breaker, Saber Blizzard,…